b.
Disconnect the webcam/microphone cable (2) from the webcam/microphone module.
c. Remove the webcam/microphone module. The webcam/microphone module is available
using spare part number 703461-001.
7. If it is necessary to replace the hinge covers:
a. The hinge covers are held in place by the same screws as the previously removed bezel.
b. Using a small tool to pry, remove the hinge covers. The hinge covers are available using
spare part number 680553-001.
66 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
