Add-On Devices
Connecting PC Cards
76 Reference Guide
Connecting PC Cards
The notebook’s PC Card slot is available for storing data and expanding the
communication capabilities of the notebook. The notebook supports one standard Type II
PC Card (PCMCIA and CardBus). Zoomed Video cards are not supported.
To insert or remove a PC Card
Inserting a PC Card
1. Hold the PC Card with its face up and its connector holes toward the card slot.
2. Slide the PC Card all the way into the slot, until its outer edge is flush with the casing
of the notebook. Most cards are properly seated when the outer edge is flush with the
casing of the notebook, but some cards are designed to protrude from the case.
To Next Page
Loading...
