Add-On Devices
Connecting External Devices
Reference Guide 89
4. Open the notebook and press the power button to turn it on.
When the notebook is docked, you can use the port replicator’s security connector to
secure the notebook and port replicator. In this situation, the port replicator’s release tab
does not work. See the port replicator manual for details.
To disconnect from the port replicator
1. Press down the release tab on the right side of the port replicator.
2. Lift the notebook out of the port replicator.
To connect an IEEE 1394 device
Your notebook includes an IEEE 1394 port (located on the notebook’s left side). You can
use it to connect devices such as audio and video equipment, disk drives, printers, and
other computers.
• Attach the device’s cable to the IEEE 1394 port on the notebook’s left side. Windows
automatically recognizes the device.
Note
If you have problems making this connection, contact the device manufacturer and the
HP Business Support Web site www.hp.com/go/bizsupport) for the latest version of the
driver for the device.
To Next Page
Loading...
