NOTE: When using a wired USB connection, make sure the switch on the HP Pocket Playlist is set
to USB mode
.
You can use several methods to browse to and access your device’s folders.
●
Control Center
1. If you are connected to HP Pocket Playlist from your computer using a USB cable, click
USB Connection.
– or –
If you are connected to HP Pocket Playlist from your computer using a wireless connection,
click Wi-Fi Connection.
NOTE: After powering on the HP Pocket Playlist, there will be a brief delay before
wireless functionality is available.
2. Click View HP Pocket Playlist.
A browser window opens showing you a list of your folders. Double-click the name of a
folder to browse its contents. Using a web interface, you can only transfer one file at a time
with a maximum size of 2 GB.
3. If you are using a Wi-Fi connection, you can also manage files by clicking Customize HP
Pocket Playlist Settings.
The folder structure for the device displays. You can manage individual files from this
interface.
NOTE: Not supported from mobile web browsers.
●
Windows Explorer
If your HP Pocket Playlist is connected to your computer with a USB cable, it displays as a drive
named “USB DISK” (similar to a USB flash drive). You can manage the files on the device as
you would any other drive.
If the device is connected to your computer with a wireless connection, it displays as a network
connection.
After opening your HP Pocket Playlist, the default network address displays in the address bar
as \\PocketPlaylist\WiFiDrive.
●
Mapping drive letters
In Windows Explorer, select Tools, and then select Map Network Drive to map the HP Pocket
Playlist.
Type \\PocketPlaylist\WiFiDrive
NOTE: If you changed the name of your device, type the new name instead of
PocketPlaylist.
6 Chapter 2 Using HP Pocket Playlist
To Next Page
Loading...
