Six menu headings appear on the Computer Setup Utility screen:
●
Main
●
Advanced
●
Boot
●
Power
●
PC Health
●
Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen,
press Esc.
4. To apply and save changes, press the F10 key.
If you have made changes that you do not want applied, press the F5 key to return to the
previous values.
To load optimized default values, press the F7 key.
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Table 3-1 Computer Setup (F10) Utility Main Menu
Heading Table
Main Computer Setup—Main on page 10
Advanced
Computer Setup—Advanced on page 11
Boot
Computer Setup—Boot on page 12
Power
Computer Setup—Power on page 13
PC Health
Computer Setup—PC Health on page 13
Exit
Computer Setup—Exit on page 14
Computer Setup (F10) Utilities 9
To Next Page
Loading...
