System Board
NOTE: All system board spare part kits include replacement thermal material.
Description Spare part number
System board for use in 3330/3380 models 663099-001
System board for use in 3330 models with NetClone 711493-001
System board for use in 3330 models with Windows 8 with no Digital Product Key (DPK) 702644-001
System board for use in 3330 models with Windows 8 Standard 702644-501
System board for use in 3330 models with Windows 8 Professional 702644-601
System board for use in 3340/3348 models 663100-001
System board for use in 3340/3348 models with NetClone 711494-001
System board for use in 3340/3348 models with Windows 8 with no Digital Product Key (DPK) 702645-001
System board for use in 3340/3348 models with Windows 8 Standard 702645-501
System board for use in 3340/3348 models with Windows 8 Professional 702645-601
System board for use in 3335/3385 models 663101-001
System board for use in 3335/3385 models with NetClone 707247-001
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules
●
Processor
●
Expansion cards
To remove the system board:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 48).
2. Remove the access panel (
Access Panel on page 49).
3. Lay the computer on its side with the rear facing toward you.
4. Remove the front bezel (
Front Bezel on page 51).
5. Remove an expansion cards (
Expansion Cards on page 59).
6. Disconnect the power, and data cables from the back of all installed drives.
7. Disconnect all cables from the system board.
8. Remove the six screws that secure the system board to the chassis.
98 Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis
To Next Page
Loading...
