Front I/O and USB Panel Housing Assembly
Description Spare part number
Front I/O and USB assembly 668572-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 48).
2. Remove the access panel (
Access Panel on page 49)
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel (
Front Bezel on page 51).
5. Unplug the three cables that connect the assembly to the system board. The assembly cables
connect to the following system board connectors:
●
F_AUDIO – yellow connector
●
F_USB1 – white connector
6. Remove the screw (1) that secures the housing to the chassis, and then slide the housing up (2).
Figure 7-37 Front I/O assembly removal
Front I/O and USB Panel Housing Assembly 83
To Next Page
Loading...
