Speaker
Description Spare part number
Speaker (includes cable) 802830-001
Before removing the speaker, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 23).
5. Disconnect the battery cable from the system board (see Battery on page 24).
Remove the speaker:
1. Detach the Touch Screen board (1) from the display panel assembly. (The Touch Screen board is
attached to the display panel assembly with double-sided adhesive.)
2. Disconnect the speaker cable (2) from the system board.
3. Release the speaker cable (3) from the retention clips built into the display panel assembly.
4. Remove the Phillips PM2.0×4.1 screw (4) that secures the speaker to the display panel assembly.
38 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
