Nano SIM card tray (select models only)
NOTE: The nano SIM card tray is spared as part of the metal kit, spare part number 823036-001.
Remove the SIM card tray:
1. Insert a small straightened paper clip (1) into the card tray access hole.
2. Press in gently only until the card tray is ejected.
3. Remove the tray (2) from the tablet.
Reverse the steps to replace the tray.
Back cover
Description Spare part number
Back cover 823034-001
Before disassembling the tablet, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the back cover:
CAUTION: Before turning the display panel assembly upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel assembly.
1. Place the tablet on a at surface, display panel side down.
2. Place a suction tool (1) on the back cover near the POGO connector.
18 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
