EasyManua.ls Logo

HP Pro Tablet 608 G1 - Left Speaker

HP Pro Tablet 608 G1
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Left speaker
Description Spare part number
Speaker kit (includes left and right speakers and cables) 823050-001
Before removing the speakers, follow these steps:
1. Turn o the tablet. If you are unsure whether the tablet is o, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see Back cover on page 18).
5. Disconnect the battery (see Disconnecting the battery on page 19).
6. Disconnect the WWAN antenna (see WWAN module (select models only) on page 21).
Remove the left speaker:
1. Disconnect the left speaker cable (1) from the system board .
2. Remove the two 3 mm P0 Phillips screws (2) that secure the left speaker to the display panel assembly.
3. Lift and remove the left speaker (3).
Reverse this procedure to install the left speaker.
Left speaker 23

Table of Contents

Other manuals for HP Pro Tablet 608 G1

Related product manuals