Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket and screws.
Description Spare part number
750-GB, 7200 rpm hard drive (2.5 in) 633252-001
750-GB, 5400 rpm hard drive (2.5 in) 634250-001
640-GB, 5400 rpm hard drive (2.5 in) 669300-001
500-GB, 7200 rpm hard drive (2.5 in) 634925-001
500-GB, 5400 rpm hard drive (2.5 in) 669299-001
320-GB, 7200 rpm hard drive (2.5 in) 641672-001
320-GB, 5400 rpm hard drive (2.5 in) 622643-001
Hard Drive Hardware Kit (includes hard drive bracket, mylar insulator, and screws) 683488-001
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 38).
5. Remove the bottom door (see
Bottom door on page 39).
Remove the hard drive:
1. Position the computer upside-down, with the battery bay toward you.
2. Remove the four Phillips PM2.5×4.0 screws (1) that secure the hard drive to the computer.
Component replacement procedures 43
To Next Page
Loading...
