Display assembly
All display assemblies include WLAN antenna transceivers and cables.
For a list of individual display spare parts, see
Display components on page 25.
Description Spare part number
35.6-cm (14.0-inch), Anti-glare, without webcam 683785-001
35.6-cm (14.0-inch), Anti-glare, with webcam 683786-001
35.6-cm (14.0-inch), BrightView, without webcam 683787-001
35.6-cm (14.0-inch), BrightView, with webcam 683788-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
Battery on page 38)
b. Bottom door (see
Bottom door on page 39).
c. Hard drive (see
Hard drive on page 43)
d. Optical drive (see
Optical drive on page 40)
e. Memory (see
Memory modules on page 45)
f. WLAN module (see
WLAN/Bluetooth combo card on page 47)
g. Keyboard (see
Keyboard on page 49)
h. Metal heat shield (see
Metal heat shield on page 51)
i. Fan (see
Fan on page 52)
j. Top cover (see
Top cover on page 53)
k. System board (see
System board on page 66)
Component replacement procedures 77
To Next Page
Loading...
