HP ProBook 450 G10 User Manual

3. Remove the battery (see Battery on page 46).
Remove the touchpad:
1. Disconnect the system board cable from the ZIF connector (1) on the touchpad.
2. Remove the four Phillips M2.0× 2.0 screws (2) that secure the touchpad to the computer.
3. Remove the two Phillips M1.6 × 2.0 screws (3) that secure the touchpad to the computer.
4. Remove the touchpad from the computer (4).
To install the touchpad, reverse this procedure.
Fan
To remove the fan, use this procedure and illustration.
Table 6-5
Fan description and part number
Description Spare part number
For use in 42 Whr models M21718-001
For use in models with discrete graphics M21719-001
For use in 51 Whr models N00095-001
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 37).
2. Remove the bottom cover (see Bottom cover on page 37).
3. Disconnect the battery cable from the system board (see Battery on page 46).
Remove the fan assembly:
50
Chapter 6 Removal and replacement procedures for authorized service provider parts

HP ProBook 450 G10 Specifications

General

Operating System	Windows 11 Pro
Processor	Intel Core i5/i7
Display	15.6-inch FHD (1920 x 1080)
RAM	Up to 64GB DDR4
Storage	Up to 1 TB PCIe NVMe SSD
Graphics	Intel UHD Graphics
Weight	Starting at 1.74 kg
Ports	USB-C, USB-A, HDMI, Ethernet, headphone/microphone combo
Wireless	Wi-Fi 6E, Bluetooth 5.3
Camera	720p HD camera
Audio	Dual stereo speakers
Security	TPM 2.0, Fingerprint reader