● Small USB cable from the system board (5)
● Speaker cable (6)
● Display cable (7)
● Antenna cables from the WLAN module (8)
● Keyboard cable (ZIF) (9)
● Touchpad cable (ZIF) (10)
●
Keyboard backlight cable (ZIF) (select products only) (11)
● RTC battery cable (12)
● Fingerprint reader cable (ZIF) (select products only) (13)
2. Remove the cables from the clip in the bracket (1).
3. Remove the four Phillips M2.0 × 4.0 screws (2) that secure the bracket to the system board, and then
remove the bracket (3).
The plastic bracket is available in the Plastics Kit as spare part number M30663-001.
58 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
