HP ProBook 635 Aero G8 - Backing Up, Restoring, and Recovering; Backing Up Information and Creating Recovery Media; Using Windows Tools for Backing Up; Using the HP Cloud Recovery Download Tool

b. Disconnect the camera cable from the ZIF connector (2) on the hub board.
c. Disconnect the smaller cables from the reverse ZIF connectors on the hub board (3) (4).
d. Use a tool (5) to release the board from the display rear cover (6).
The hub board is available using spare part numbers M30673-001 (for use on computer models equipped
with an IR camera) and M30672-001 (for use on computer models equipped with an RGB camera or
microphone module).
13. If you need to remove the ambient light sensor from the display, disconnect the cable from the reverse ZIF
connector on the board (1), and then use a tool (2) to release the sensor from the computer (3).
The ambient light sensor is available using spare part number M30669-001.
Display assembly 69