HP ProBook 635 Aero G8 - Restoring and Recovering Your System; Creating a System Restore; Restoring and Recovery Methods; Recovering Using HP Recovery Media

14. If you need to remove the second ambient light sensor from the display, disconnect the cables from the ZIF
connectors on the board (1), and then remove the sensor from the computer (2).
15. If you need to remove the camera module:
▲ Use a tool to lift up evenly across the module and peel the module up from the display back cover
(1), and then disconnect the cable from the reverse ZIF connector on the module (2). The camera
module is available using spare part numbers M30660-001 (on computer models equipped with an
HD camera) and M30661-001 (on computer models equipped with an IR camera). The microphone
module is available using spare part number M30671-001.
NOTE: For installation, note that the cable routes under the camera module before it connects to the
module.
70 Chapter 6 Removal and replacement procedures for authorized service provider parts