HP ProBook 635 Aero G8 - Changing the Computer Boot Order; Using HP Sure Recover

16. If you need to remove the display cable, disconnect the cable from the ZIF connector on the hub board (1),
remove the cable from the clips at the bottom of the display back cover (2), and then remove the cable (3).
The display panel cable is available using spare part number M30647-001.
17. If you need to remove the camera cable, disconnect the cable from the ZIF connector on the hub board, and
then peel the cable o the inside of the display back cover to remove it.
The camera cable is available in the Cable Kit, spare part number M30646-001.
Display assembly 71