HP ProBook 645 G4 - Removal and Replacement Procedures for Customer Self-Repair Parts; Component Replacement Procedures

IMPORTANT: To prevent damage to the memory module, hold the memory module by the edges only. Do
not touch the components on the memory module. Do not bend the memory module.
1. Align the notched edge of the memory module with the tab in the memory module slot (1).
2. Press the module into the slot until seated (2).
3. Gently press down on the module edges until the side retention clips snap into place (3).
36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts