Internal frame
Description Spare part number
Internal frame L09540-001
Before removing the internal frame, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the following components:
a. Bottom cover (see Bottom cover on page 33)
b. Battery (see Battery on page 34)
c. Hard drive (see Hard drive on page 37)
d. Keyboard (see Keyboard on page 43)
Remove the internal frame:
IMPORTANT: Make special note of each screw size and location during removal and replacement
1. Remove the antenna cables from clips in the frame (1), and then remove the cables from the frame (2).
Component replacement procedures 47
To Next Page
Loading...
