Need help?Do you have a question about the HP ProCurve 2510 and is the answer not in the manual?
General| Layer | Layer 2 |
|---|---|
| Operating Humidity | 15% to 95% non-condensing |
| Model | HP ProCurve 2510 |
| Switching Capacity | 8.8 Gbps |
| Forwarding Rate | 6.6 Mpps |
| Management | Web, CLI, SNMP |
| Dimensions | 4.4 x 44.3 x 25.4 cm |
| Jumbo Frame Support | Up to 9216 bytes |
| Operating Temperature | 0°C to 45°C |
| Weight | 6.61 lbs (3 kg) (24-port), 9.92 lbs (4.5 kg) (48-port) |
Describes the purpose and content of the Management and Configuration Guide for ProCurve Series 2510 Switches.
Explains the switch's two configuration files: running-config and startup-config.
Details how to use CLI commands to view and reconfigure switch features, including saving changes.
Details IP configuration features including IP address, subnet mask, and default gateway settings.
Covers managing the switch via SNMP using applications like ProCurve Manager.
Describes how the switch assigns MAC addresses for management functions and internal operations.
To Next Page