HP ProCurve 2510 User Manual

9-1
9
Time Protocols
Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
TimeP Time Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
SNTP Time Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Overview: Selecting a Time Synchronization Protocol or
Turning Off Time Protocol Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
General Steps for Running a Time Protocol on the Switch . . . . . . . . . 9-3
Disabling Time Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
SNTP: Viewing, Selecting, and Configuring . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Menu: Viewing and Configuring SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
CLI: Viewing and Configuring SNTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Viewing the Current SNTP Configuration . . . . . . . . . . . . . . . . . . . . 9-8
Configuring (Enabling or Disabling) the SNTP Mode . . . . . . . . . . 9-9
TimeP: Viewing, Selecting, and Configuring . . . . . . . . . . . . . . . . . . . . . . . . 9-14
Menu: Viewing and Configuring TimeP . . . . . . . . . . . . . . . . . . . . . . . . 9-15
CLI: Viewing and Configuring TimeP . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16
Viewing the Current TimeP Configuration . . . . . . . . . . . . . . . . . . 9-17
Configuring (Enabling or Disabling) the TimeP Mode . . . . . . . . 9-18
SNTP Unicast Time Polling with Multiple SNTP Servers . . . . . . . . . . . . . 9-21
Address Prioritization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22
Adding and Deleting SNTP Server Addresses . . . . . . . . . . . . . . . . . . . 9-22
Menu Interface Operation with Multiple SNTP Server
Addresses Configured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23
SNTP Messages in the Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-24

HP ProCurve 2510 Specifications

General

Layer	Layer 2
Operating Humidity	15% to 95% non-condensing
Model	HP ProCurve 2510
Switching Capacity	8.8 Gbps
Forwarding Rate	6.6 Mpps
Management	Web, CLI, SNMP
Dimensions	4.4 x 44.3 x 25.4 cm
Jumbo Frame Support	Up to 9216 bytes
Operating Temperature	0°C to 45°C
Weight	6.61 lbs (3 kg) (24-port), 9.92 lbs (4.5 kg) (48-port)