7-12
Interface Access and System Information
System Information
Time Zone: The number of minutes your time zone location is to the
West (-) or East (+) of Coordinated Universal Time (formerly GMT). The
default 0 means no time zone is configured. For example, Berlin, Germany is
in the +1 zone, while Vancouver, Canada is in the -8 zone.
Daylight Time Rule: Specifies the daylight savings time rule to apply for your
location. The default is None. (For more on this topic, see Appendix E,
“Daylight Savings Time on ProCurve Switches.)
Time: Used in the CLI to specify the time of day, the date, and other system
parameters.
Menu: Viewing and Configuring System Information
To access the system information parameters:
1. From the Main Menu, Select...
2. Switch Configuration...
1. System Information
Figure 7-6. The System Information Configuration Screen (Default Values)
Note To help simplify administration, it is recommended that you configure
System Name to a character string that is meaningful within your system.
2. Press [E] (for Edit). The cursor moves to the System Name field.
System Information
To Next Page
Loading...
Need help?
General