To Next Page

To Previous Page

7-6

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Telnet

To re-enable inbound Telnet access:

ProCurve(config)# telnet-server

Outbound Telnet to Another Device. This feature operates indepen-

dently of the telnet-server status and enables you to Telnet to another device

that has an IP address.

Syntax: telnet < ip-address >

For example:

ProCurve# telnet 10.28.27.204

Reconfigure Web Browser Access. In the default configuration, web

browser access is enabled.

Syntax: [no] web-management

To disable web browser access:

ProCurve(config)# no web-management

To re-enable web browser access:

ProCurve(config)# web-management

Reconfigure the Console/Serial Link Settings. You can reconfigure one

or more console parameters with one console command.

Syntax: console

[terminal <vt100 | ansi>]

[screen-refresh <1 | 3 | 5 | 10 | 20 | 30 | 45 | 60>]

[baud-rate

<speed-sense | 1200 | 2400 | 4800 | 9600 | 19200 |38400 | 57600>]

[flow-control <xon/xoff | none>]

[inactivity-timer <0 1 5 10 15 20 30 60 120>]

[events <none | all | non-info | critical | debug]

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2510 and is the answer not in the manual?

HP ProCurve 2510 Specifications

General