Getting Started
Introduction
Introduction
This Access Security Guide is intended for use with the following switches:
■ ProCurve Switch 10G CX4 ■ ProCurve Switch 10G X2
6400cl-6xg 6400cl-6xg
■ ProCurve Switch 5304xl ■ ProCurve Switch 5348xl
■ ProCurve Switch 5308xl ■ ProCurve Switch 5372xl
■ ProCurve Switch 3400cl-24G ■ ProCurve Switch 3400cl-48G
This guide describes how to use the command line interface (CLI), menu
interface, and web browser to configure and use the switch security features
covered in the following chapters.
For an overview of other product documentation for the above switches, refer
to
“Product Documentation” on page v.
The Product Documentation CD-ROM shipped with the switch includes a
copy of this guide. You can also download a copy from the ProCurve Network
-
ing web site, http://www.procurve.com.
Conventions
This guide uses the following conventions for command syntax and displayed
information.
Feature Descriptions by Model
In cases where a software feature is not available in all of the switch models
covered by this guide, the section heading specifically indicates which product
or product series offer the feature.
For example, (the switch is highlighted here in bold):
“QoS Pass-Through Mode on the Series 5300xl Switches”.
1-2
To Next Page
Loading...
Need help?
General