Traffic/Security Filters
Configuring Traffic/Security Filters
Lists the filter type and other data for the filter corre-
sponding to the index number in the show filter output. Also
lists, for each outbound destination port in the switch, the
port number, port type, and filter action (forward or drop).
The switch assigns the lowest available index number to a
new filter. If you delete a filter, the index number for that
filter becomes available for the next filter you create.
For example, to display the filters created in figure 9-8 on page 9-21 and then
list the details of the multicast filter for multicast address 010000-224466:
l
i
l
fil i
Filter Index Numbers
(Automatically Assigned)
Lists all filters configured
in the switch.
Uses the index number
(IDX) for a specific filter
to list the details for that
filter on y.
Criter a for Individual
Filters
Note for the 3400cl
and 6400cl Switches:
On y the Source-Port
ters n this example
apply to these switch
models.
Figure 9-9. Example of Displaying Filter Data
9-22
To Next Page
Loading...
Need help?
General