RADIUS Authentication and Accounting
Configuring RADIUS Accounting
For example, to configure RADIUS accounting on the switch with start-stop
for exec functions and stop-only for system functions:
Configures exec and system
accounting and controls.
Summarizes the switch’s
accounting configuration.
Exec and System accounting are
active. (Assumes the switch is
configured to access a reachable
Figure 6-19. Example of Configuring Accounting Types
3. (Optional) Configure Session Blocking and Interim
Updating Options
These optional parameters give you additional control over accounting data.
â– Updates: In addition to using a Start-Stop or Stop-Only trigger, you
can optionally configure the switch to send periodic accounting
record updates to a RADIUS server.
â– Suppress: The switch can suppress accounting for an unknown user
having no username.
Syntax: [no] aaa accounting update periodic < 1 - 525600>
Sets the accounting update period for all accounting ses-
sions on the switch. (The no form disables the update
function and resets the value to zero.) (Default: zero; dis
-
abled).
Syntax: [no] aaa accounting suppress null-username
Disables accounting for unknown users having no user-
name. (Default: suppression disabled)
To continue the example in figure 6-19, suppose that you wanted the switch to:
6-54
To Next Page
Loading...
Need help?
General