HP ProDesk 405 G2 Microtower User Manual

6. Slide the system board toward the front of the computer to disengage the I/O panel(2), and then lift the
system board out of the computer (3).
When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and
then align the board with the chassis screw holes.
NOTE: When replacing the system board, you must change the chassis serial number in the BIOS.
System board 59

HP ProDesk 405 G2 Microtower Specifications

General

Brand	HP
Model	ProDesk 405 G2 Microtower
Category	Desktop
Language	English