Figure 6 shows a diagram of the internal components of an HP CN1000E CNA.
Figure 6 HP CN1000E internal components
.
Features
The HP CN1000E CNA has the following features:
• Ships with half-height and full-height brackets
• Dual ports for redundancy
• Full 10-Gb/s bandwidth on both ports
• Each port can operate as a NIC and/or FCoE port
• 2 SFP+ connectors
• Supports optical or copper cables
Considerations
• x8 PCI Express Gen2 card
• Requires 14.5 W of power
• 1 GbE is not supported
10
To Next Page
Loading...
