HP ProLiant DL120 G7 - Install the Pcie Riser Cage; Remove the Air Baffle

Operations 19
c.
Remove the riser cage.
Install the PCIe riser cage
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCIe riser board assembly.
1. Install the PCIe riser cage.
2. Connect any internal cables for expansion boards.
3. Install the access panel (on page 18).
4. Install the server into the rack ("Installing the server into the rack" on page 25).
Remove the air baffle