HP ProLiant DL360 G7 - Page 53

Hardware options installation 53
3.
Remove the access panel (on page 21).
4. Remove the hard drives from bays 1 and 2.
5. Remove the hard drive bezel blanks from hard drive bays 5 and 6 ("Removing hard drive bezel
blanks" on page 47).
6. Remove the dual hard drive bezel blank ("Removing the dual hard drive bezel blank" on page 48).
7. Install the hard drive cage.
8. If installed, remove the BBWC battery pack or the FBWC capacitor pack (on page 21).
9. Remove the air baffle (on page 22).
10. Remove the fan blank.