Hardware options installation 52
12.
Route the cable along the edge of the system board.
13. Install fan modules 3 and 4.
14. Install the air baffle (on page 22).
15. If removed, install the BBWC battery pack or the FBWC capacitor pack ("Installing the BBWC
battery pack or the FBWC capacitor pack" on page 58).
16. Install the access panel (on page 21).
17. Slide the server into the rack.
18. Power up the server (on page 19).
Hard drive blackplane option
When the hard drive backplane option is installed, the server does not support the DVD-ROM or DVD-RW
drive options.
To install the component:
1. Power down the server (on page 19).
2. Extend the server from the rack (on page 19).
To Next Page
Loading...
