HP ProLiant DL360 G9 - Rear Panel LEDs of HP ProLiant DL360 G9 Server

Item Description Status
1 UID button/LED Solid Blue = Identification is activated
Flashing Blue = System is being managed remotely
Off = Identification is deactivated
2 (left) HP iLO/Standard
NIC activity LED
Solid Green = Activity exists
Flashing Green = Activity exists
Off = No activity exists
2 (right) HP iLO/Standard
NIC link LED
Solid Green = Link exists
Off = No link exists
3 Power supply 2 LED Solid Green = Normal
Off = One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit
4 Power supply 1 LED Solid Green = Normal
Off = One or more of the following conditions exists:
• AC power unavailable
• Power supply failed
• Power supply in standby mode
• Power supply exceeded current limit
Rear panel LEDs of HP ProLiant DL360 G9 Server
November 2015 Maintaining and Troubleshooting the HP ProLiant DL360 G9 Server 11
Comments on this document? infodev@avaya.com