Server Operations 29
c. Lift the front of the assembly slightly and unseat the riser boards from
the PCI riser board connectors.
Installing PCI Riser Board Assembly
CAUTION: To prevent damage to the server or expansion
boards, power down the server and remove all AC power cords before
removing or installing the PCI riser board.
IMPORTANT: Be sure that all DIMM slot latches are closed to provide
adequate clearance before installing the PCI riser board assembly with
a half-length expansion board.
1. Align the PCI riser boards with the corresponding connectors on the system
board and install it into place.
To Next Page
Loading...
