HP ProLiant DL380 Generation9

QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Standard Features
Page 10
• Mass Configuration Deployment Tool using RESTful API for iLO 4
• PXE boot support for IPv6 networks
• Boot support for option cards that only support a UEFI option ROM
• Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in
the factory for your HPE ProLiant Gen9 Server.
Form Factor
One of the following
depending on
model
2U Rack form factor
8 SFF & 24SFF Drive Bay Version:
3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
4 LFF & 12LFF Drive Bay Version:
3.44 x 17.54 x 28.75 in (8.73 x 44.55 x 73.02 cm)
NOTE: Dimensions without bezel.
Embedded
Management
HPE Integrated
Lights-Out
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and
remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more
at
http://www.hpe.com/servers/uefi
.
RESTful API
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server
management such as configuration and maintenance tasks based on modern
industry standards. Learn more at
http://www.hpe.com/info/restfulapi
.
Intelligent
Provisioning
Hassle free server and OS provisioning for 1 or few servers with Intelligent
Provisioning. Learn more
at
http://www.hpe.com/servers/intelligentprovisioning
.
Embedded
Remote Support
The Hewlett Packard Enterprise embedded remote support, when used with
Insight Online direct connect or HPE Insight Remote Support, allows HPE
ProLiant servers to transmit hardware events directly to Hewlett Packard
Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated
phone home support. Learn more
at
http://www.hpe.com/info/insightonline/explore
.
Server utilities
Smart Update
Optimize firmware and driver updates with Smart Update solutions including
Smart Update Manager (SUM) and Service Pack for ProLiant (SPP). Learn more
at
http://www.hpe.com/servers/smartupdatemanager
.
HPE Systems
Insight Manager
(HPE SIM)
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and
seamless firmware updates. Learn more at http://www.hpe.com/servers/hpsim.