HPE ProLiant DL380 Generation9 (Gen9)
Optical Drive supported via Universal Media Bay
NOTE: The Universal Media bay provides front VGA and 2xUSB 2.0, plus ability to add 2SFF and
Optical.
NOTE: Universal Media bay is only available with 8 or 8+8SFF model & can be populated in Bay1
HPE Legacy Mode (FIO only, 758959-B22)
NOTE:
UEFI is the default mode for CTO and pre-configured SKUs. Can change default to legacy
Industry Standard
Compliance
Microsoft® Logo certifications
This support is on the optional Universal Media Bay.
NOTE: The DL380 Gen9 is now one of the first HPE ProLiant Gen9 Servers with Extended
Ambient Support up to 45 C for data center infrastructures designed for better energy efficiency
such as but not limited to fresh air cooling.
For additional technical thermal details regarding ambient temperatures, humidity and features
support please visit: http://www.hp.com/servers/ASHRAE.
UEFI (Unified Extensible Firmware Interface Forum)
NOTE:
UEFI is the default for the DL380 Gen9. Legacy model can be selected in the field or as a
Integrated Matrox G200eH2 video standard with 16MB of Video RAM
• 1280 x 1024 (32 bpp)
HPE iLO 4 On System Management Memory
• 16 MB Flash
• 256 MB DDR3 with ECC (112 MB after ECC and video)
HPE Server
UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
and more secured configuration than the legacy ROM while interacting with your server at boot time.
HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
To Next Page
Loading...
Need help?
General
