HPE ProLiant DL380 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
HP DL380 Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HP DL380 Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HP DL380 Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO
Processor Kit
NOTE: Ships with a High Performance Heatsink.
HP DL380 Gen9 Intel® Xeon® E5-2687Wv3 (3.1GHz/10-core/25MB/160W) FIO
Processor Kit
2SFF rear drives are not supported with this processor in a 12LFF model.
NOTE: If two processors are desired, select one xxxxxx-L21 and one corresponding xxxxxx-B21.
NOTE: Up to two processors supported. Mixing different processor models is not supported.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: When v4 Processor is selected, then only PC4-2400T Memory Kit can be selected.
NOTE: When v3 Processor is selected, then only PC4-2133P Memory Kit can be selected.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet
designated) = version number
NOTE: Select one or more memory from below
NOTE: LRDIMM and RDIMM are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen9 servers support LRDIMM and RDIMM.
NOTE: HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant server. HP Smart Memory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9
NOTE: If only one processor is installed only half of the total DIMM slots are available. When
populating with two processors all DIMM slots are available.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
.
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 2400MHz, 2133MHz, 1866MHz, 1600MHz, or 1333MHz. Please see Memory Population Table
or Online Memory Configuration Tool at: http://www.hp.com/go/ddr4config.
Registered DIMMs (RDIMMs) for E5-2600v3 Series
HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory
Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory
Kit
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory
Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory
Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory
Kit
Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
Memory Kit
To Next Page
Loading...
