HPE ProLiant DL380 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced
Memory Kit
Registered DIMMs (RDIMMs) for E5-2600v4 Series
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory
Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory
Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory
Kit
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced
Memory Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced
Memory Kit
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced
Memory Kit
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of
the same input voltage, output rating, and efficiency rating. If non-matching power supplies are
installed, you may receive an error message and/or experience operational issues with your server.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your
server configuration in the HPE Power Advisor tool to determine the right size power supply for
your server configuration. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
HPE Flex Slot Platinum Hot-Plug Power Supplies
HP 500W Flex Slot Platinum Hot Plug Power Supply Kit
HP 800W Flex Slot Platinum Hot Plug Power Supply Kit
HP 800W Flex Slot Titanium Hot Plug Power Supply Kit
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96%
and include a standard C-14 power inlet connector.
HP 800W Flex Slot Universal Hot Plug Power Supply Kit
NOTE: Flex Slot universal power supplies support power efficiency of up to 94%
and support both 277VAC/380VDC power inputs.
HP 800W Flex Slot -48VDC Hot Plug Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit
HP 750W Flex Slot Hot Plug Battery Backup Module
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled
configuration.
NOTE: Only 1 Battery Backup module per server, and a Flex Slot Power Supply
NOTE: The above power supply options are all 80Plus Platinum-certified with an
efficiency rating of up to 94%. Support for HPE Power Discovery Services is
included with the 1400W Flex Slot option. Power specifications and technical
content for all HPE Server power supplies can be found
at:
http://www.hp.com/go/proliant/powersupply
Step 3: Choose Additional Factory Integratable Options (only one of the following from each
list unless otherwise noted)
Controllers
NOTE: The embedded B140i controller will be used as the primary controller if
no controller is selected from the list below. Embedded SATA controller can
support up to 8 SATA hard drives. Cable Kit may be required.