HPE ProLiant DL380 Generation9 (Gen9)
HPE Ethernet 4x25Gb 1-port 620QSFP28 Adapter
NOTE:
Initially available as a field upgrade only option.
HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 366FLR Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HPE FlexFabric 10Gb 4-port 536FLR-T Adapter
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
HPE FlexFabric 10Gb 2-port 556FLR-T Adapter
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter
HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter
NOTE: The DL380 Gen9 ships with 4x1Gb Embedded.
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be
changed from the original configuration after the server is shipped.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic
environments must be purchased separately. Please see the related NIC QuickSpecs for Technical
Specifications and additional information: http://www.hp.com/go/ProLiantNICs.
HP InfiniBand FDR 2-port 545QSFP Adapter
NOTE: The RHEL6.5 driver is not part of SPP, but may be downloaded
here: http://downloads.linux.hp.com/SDR/downloads/MLNX_OFED/
.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter
HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel® Omni-Path
Architecture Adapter
HPE 100Gb 1-port OP101 QSFP28 x8 PCIe Gen3 with Intel® Omni-Path
Architecture Adapter
HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter
HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
HPE I/O Expansion
Options
HP DL380 Gen9 Primary 2 Slot GPU Ready Riser Kit
NOTE: This is for slot 1 and supports double wide GPGPUs.
NOTE: For Graphics cards please also order the DL380 Gen9 Graphics
Enablement kit, 719082-B21
Slot1: 1xGen3 x16 FH/FL, 1xGen3 x8 FH/HL.
NOTE: Double wide PCIe cards are only supported in risers with the Processors
leveraging the High Performance Heatsink. For Processors requiring double
wide GPU support please order the GPU enablement kit (719082-B21).
HP DL380 Gen9 Secondary 3 Slot GPU Ready Riser Kit
NOTE:
This is for slot 2 and supports double wide GPGPUs.