HPE ProLiant DL380 Generation9 (Gen9)
NOTE: For Graphics cards please also order the DL380 Gen9 Graphics
Enablement kit, 719082-B21
Slot2: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL.
NOTE: Double wide PCIe cards are only supported in risers with the Processors
leveraging the High Performance Heatsink. For Processors requiring double
wide GPU support please order the GPU enablement kit (719082-B21).
Power
HPE Flex Slot Platinum Hot-plug Power supplies
HPE 500W Flex Slot Platinum Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%
and include a standard C-14 power inlet connector.
HPE 800W Flex Slot Titanium Hot Plug Power Supply Kit
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96%
and include a standard C-14 power inlet connector.
HPE 800W Flex Slot Platinum Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%
and include a standard C-14 power inlet connector.
HPE 800W Flex Slot Universal Hot Plug Power Supply Kit
NOTE: Flex Slot universal power supplies support power efficiency of up to 94%
and support both 277VAC/380VDC power inputs.
HPE 800W Flex Slot -48VDC Hot Plug Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to
94% and include a C-14 power inlet connector that can support HPE Power
Discovery Services (blue connector).
HPE 750W Flex Slot Hot Plug Battery Backup Module
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled
configuration.
NOTE: Only 1 Battery Backup module per server, and a Flex Slot Power Supply
needed in parallel.
NOTE: All power supplies must be of the same input voltage, output rating, and efficiency rating. If non-
matching power supplies are installed, you may receive an error message and/or experience operational
issues with your server.
NOTE: Mixing different power supplies in the same server may limit or disable some power supply
features including support for power redundancy. To ensure access to all available features, all power
supplies within the same server should have the same output and efficiency ratings
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your server
configuration. The HPE Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.
NOTE: Support for HPE Power Discovery Services is included with the 1400W Flex Slot option. Power
specifications and technical content for all HPE Server power supplies can be found
at http://www.hp.com/go/proliant/powersupply.
NOTE:
Maximum of 2 Flex Slot PS per platform.
HPE Computation
and Graphics
Accelerator
s
HP DL380 Gen9 Graphics Enablement Kit
NOTE: This GPU enablement kit includes 2 Heatsinks and 8 cables to enable
double wide GPUs to be supported.
NOTE:
For doublewide GPU support you are required to have at least 1x1400W
Power Supply (720620-B21), per card for cards over 150W. Cards 150W or
To Next Page
Loading...
