HPE ProLiant DL380 Generation9 (Gen9)
under can used 800W Power Supplies; however check the power usage via the
HPE Power Advisor Tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: There are limitations on the server and processor supported when
adding Graphics accelerators.
NOTE: Passive cards will require the addition of the High Performance Fan Kit
(719079-B21).
NOTE: We support up to 2 Double wide and 3 single wide Graphics cards,
limitations apply.
NOTE: This kit support up to 2 double wide Graphics cards.
NOTE: Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots
left open.
NOTE: There are limitations on GPU support (1x double wide) with the
NVMe bay installed.
NOTE: All GPU support is limited with 1TB max memory support.
NOTE: This kit includes PCIe GPU Retention Brackets that need to be installed
on the air baffle to support FL cards.
NOTE: Not required for M2000.
HP NVIDIA GRID K1 Quad GPU PCIe Graphics Accelerator
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: There are limitations on the chassis and processor supported when
adding Graphics accelerators.
NOTE: This card will require the addition of the High Performance Fan Kit
(719079-B21).
NVIDIA Tesla K40C 12GB Computational Accelerator
NOTE: This is supported in all server models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: For doublewide GPU support you are required to
Power Supply (720620-B21), per card.
Only supported with E5-2600v3 processors.
HP NVIDIA Tesla K80 Dual GPU PCIe Computational Accelerator
NOTE:
For doublewide GPU support you are required to have at least 1x1400W
Power Supply (720620-B21), per card.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: PCIe accelerators are not supported in conjunction with this card.
NOTE: This card will require the addition of the High Performance Fan Kit
(719079-B21).
To Next Page
Loading...
