HPE ProLiant DL380 Generation9 (Gen9)
NOTE: Max cooling setting required to support in RSBU.
NOTE: No support in combination with the 24SFF or 12LFF models.
HP NVIDIA Quadro K2200 Graphics Accelerator
NOTE: This is supported in all server models.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
NVIDIA Quadro K6000 PCI-E Graphics Adapter
NOTE: This is supported in all server models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
HPE NVIDIA Tesla M4 4GB Computational Accelerator
NOTE: Maximum of 3 cards supported per server.
NOTE: This is supported in all server models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: Only supported with E5-2600v4 processors.
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
NOTE: No GPU enablement kit is required for this option.
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Tesla M40 24GB Computational Accelerator
NOTE: Maximum 2 supported with both risers, support for 2 cards requires the
1400W Power Supply (720620-B21) to be selected.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Tesla M60 Reverse Air Flow Dual GPU PCIe Graphics Accelerator
NOTE: Maximum 2 supported with both risers, support for 2 cards requires the
1400W Power Supply (720620-B21) to be selected.
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: This card is limited to Processors running with under 140W power
consumption.
Additional Grid 2.0 Licensing from NVIDIA is required.
To Next Page
Loading...
