HPE ProLiant DL380 Generation9 (Gen9)
HPE NVIDIA Quadro M2000 Graphics Accelerator
NOTE: Maximum of 3 cards supported per server.
NOTE: This is supported in all server models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: Only supported with E5-2600v4 processors.
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
NOTE: No GPU enablement kit is required for this option.
HPE NVIDIA Quadro M4000 Graphics Accelerator
NOTE: Only supported with E5-2600v4 processors.
NOTE: This is supported in all chassis.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
HP NVIDIA Quadro M5000 Graphics Accelerator
NOTE: Only supported with E5-2600v4 processors.
NOTE: This is supported in all server models.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS
(Per GPU). However check the power usage via the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.
HP NVIDIA Quadro M6000 Graphics Accelerator
NOTE: Maximum 2 supported with both risers, support for 2 cards requires the
1400W Power Supply (720620-B21) to be selected.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: This card only runs at PCIeGen2 speeds.
HPE NVIDIA Quadro M6000 24GB Graphics Accelerator
NOTE: Maximum 2 supported with both risers, support for 2 cards requires the
1400W Power Supply (720620-B21) to be selected.
NOTE: The Primary GPU riser (719076-B21) is required to support this in
slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in
slot2 (2nd processor required).
NOTE: Only supported with E5-2600v4 processors.
Intel® Xeon® Phi 7120P (16GB/300W) Coprocessor Kit
NOTE:
This card only runs at PCIeGen2 speeds.
To Next Page
Loading...
