HP ProLiant DL380 Generation9

QuickSpecs
HPE ProLiant DL380 Generation9 (Gen9)
Standard Features
Page 6
NOTE:
All slots support PCIe cards to 150W or more depending on card, but an additional Power Cord
Option is required (PN 669777-B21). See Option Section below for offering.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High
Performance Heatsink. For Processors requiring double wide GPU support please order the GPU
enablement kit (719082-B21).
Slot 2 PCIe Riser
(Optional 3-slot)
719073-B21
Expansion
Slots #
Technology
Bus
Width
Connector
Width
Bus
Number
Device
Number
Form Factor
Notes
4
PCIe 3.0
x16
x16
16
Full-height, full-
length slot
Proc 2
5
PCIe 3.0
x16
x16
20
Full-height, full-
length slot
Proc 2
6
PCIe 3.0
x8
x8
23
Full-height, half-
length slot
Proc 2
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support PCIe cards to 150W or more depending on card but an additional Power Cord
Option is required (PN 669777-B21). See Option Section below for offering.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High
Performance Heatsink. For Processors requiring double wide GPU support please order the GPU
enablement kit (719082-B21).
Slot 1 PCIe Riser
(Optional 2-slot)
719076-B21
Expansion
Slots #
Technology
Bus
Width
Connector
Width
Bus
Number
Device
Number
Form Factor
Notes
2
PCIe 3.0
x16
x16
0x05
Full-height, full-
length slot
Proc 1
3
PCIe 3.0
x8
x8
0x08
Full-height, half-
length slot
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: This will replace the standard primary riser and supports double wide cards.
NOTE: All slots support PCIe cards to 150W or more depending on card, but an additional Power Cord
Option is required (PN 669777-B21). See Option Section below for offering.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High
Performance Heatsink. For Processors requiring double wide GPU support please order the GPU
enablement kit (719082-B21).
Storage Controller
One of the following
depending on
mode
l
Entry Models
HPE Dynamic Smart Array B140i Controller
NOTE:
The embedded B140i controller will operate in UEFI only mode. For legacy support
an additional controller will be needed, and for CTO orders please also select
the Legacy
mode settings part, 758959
-B22.
NOTE:
The B140i defaults to AHCI off the chipset. Smart array needs to be enables on the
SATA only models if required.
NOTE:
The B140i will not operate in Legacy mode.
Base Models
HPE Dynamic Smart Array B140i Controller
HPE Flexible Smart Array P440ar/2G FIO Controller
HPE Flexible Smart Array P840/4G FIO Controller
HPE Smart Array P840ar/2G Controller
Performance Models
HPE Dynamic Smart Array B140i Controller
HPE Flexible Smart Array P440ar/2GB
Internal Storage
Devices
Optical Drive
Ships standard in Performance Models
Optional: DVD-ROM, DVD-RW