Item Description Status
1 UID LED button Blue = Activated
Flashing blue = System being remotely managed
Off = Deactivated
2 Health LED Green = Normal
Flashing amber = System degraded. To identify a component in a
degraded state, see "
Systems Insight Display LEDs (on page 68)."
r tem critical. To identify a component in a
itical state, see "
Systems Insight Display LEDs (on page 68)."
Flashing
cr
ed = Sys
3 Power On/Standby button
and system power LED
Green =
Amber = System shut down, but power still applied
Off = Power c
System on
ord not attached or power supply failure
Syste s Insight Di y LEm spla Ds
Item Description Status
1 NIC LEDs Off
Flas g
Green = k link
= No link to network
hin green = Network link and activity
Networ
2 Power Cap LED Off e
Flas
Green = Power cap configured
= S rver in standby
hing amber = Power cap exceeded
All other LEDs Off = Normal
Amber = Failure
Component identification 68
To Next Page
Loading...
