Notes:
"Prim led in the primary riser connector.
"Sec e risers are installed in the secondary riser connector.
FL/F ull-height. HL/FH denotes half-length, full-height. LP denotes low profile.
The maximum power of 225W with an HP power cable. This cable must
be u d wattages greater than 75W.
• ary" denotes the risers are instal
• ondary" denotes th
• H denotes full-length, f
• PCIe x16 riser supports a
sed for PCIe car
Syste bm oard
System board components
Item Description
1 Processor 1 DIMM slots
2 Primary SAS power connector
3 Secondary SAS power connector
4 Front I/O connector
5 SATA optical drive connector
6 USB connector
7 System battery or connect
8 TPM connector
9 NMI jumper
Component identification 72
To Next Page
Loading...
