HP ProLiant ML110 - G2 Server User Manual

Troubleshooting 62
• OS boot problems flowchart (on page 68)
• Server fault indications flowchart (on page 69)
Start diagnosis flowchart
Use the following flowchart and table to start the diagnostic process.
Item See
1 "General diagnosis flowchart (on page 62)"
2 "Power-on problems flowchart (on page 64)"
3 "POST problems flowchart (on page 66)"
4 "OS boot problems flowchart (on page 68)"
5 "Server fault indications flowchart (on page 69)"
General diagnosis flowchart
The General Diagnosis flowchart provides a generic approach to troubleshooting. If you are unsure of the
problem, or if the other flowcharts do not correct the problem, use the following flowchart.

HP ProLiant ML110 - G2 Server Specifications

General

Server Type	Tower
Chipset	Intel E7210
Memory Type	DDR SDRAM
Maximum Memory	4 GB
Optical Drive	Optional
Processor Sockets	1
Memory Slots	4
Form Factor	Tower
Processor	Intel Pentium 4
Storage Controller	Integrated SATA
Drive Bays	2 x 3.5" internal
Network Controller	Integrated Broadcom Gigabit Ethernet
Power Supply	300W
Operating System Support	Microsoft Windows Server 2003, Red Hat Linux