Troubleshooting 70
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1
Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(http://www.hp.com/products/servers/platforms
)
2 "Power-on problems flowchart (on page 64)"
3 "HP Insight Diagnostics (on page 48)"
4
"Hardware problems (on page 71)"
Server maintenance and service guide, located on the Easy Set-up
CD, the support CD, or the HP website
(http://www.hp.com/products/servers/platforms
)
5 "HP contact information (on page 106)"
To Next Page
Loading...
