HP ProLiant ML150

Power **
HP ProLiant ML150 G6 Fully Configured (see ** )
Fully Loaded System Input Wattage (W) 567W (595W)
Fully Loaded System Input Current (A rms) 4.78A (5.1A) @ 115V, 2.38A (2.55A) @ 230V
Fully Loaded System Thermal (BTU- Hr)r) 1794 BTU/526W (1933BTU/595W)
Fully Loaded System VA (Volt-Amp) 568.1 (601)
System Leakage with all power supplies loaded (mA) 0.7mA (1.25mA)
System Inrush Current with all power supplies loaded (A) 50A (37.6A)
Power cord requirements Nema 5-15P to IEC320-C13
IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of:
(2) CPUs up to 80W (95W), 2.4G (2.93G)
(12) 2GB UDIMMs or 10 2GB RDIMMs (12pc 4G RDIMM)
(4) HDDs SAS (8* HDDs SAS)
(2) DVD-ROMs
(3) x8 PCI-E
(1) x16 PCI-E
(1) PCI 32 3.3V
(1) 460 watts power supply (750W power supply)
Power Cords (13 Cord Sets)
Country Power Cord Part Number
APD 100614-009, 100613-008, 139867-005, 397138-002 (India)
Brazil 285052-001
Australia/New Zealand 100661-001
Euro 100614-009
France 100614-009
Germany 100614-009
Japan 139867-005
PRC 286496-001, 100613-008, 393312-001
Brazil 438723-001
UK/Singapore 100613-008
US, Taiwan 121565-001
QuickSpecs
HP ProLiant ML150 Generation 6 (G6)
System Specifications
DA - 13249 North America — Version 33 — September 24, 2012 Page 40