EasyManuals Logo

HP ProLiant ML150 Quickspecs

HP ProLiant ML150
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Server Power Cord
One Lowline NEMA power cord
Power Supply
Standard: HP 460W Factory Integrated Power Supply
Optional: HP 750W Common Slot Gold Hot Plug Power Supply
NOTE:
The installation of the optional 750W Redundant Power Supply requires a HP Redundant Power
Supply Enablement Kit (P/N 508544-B21).
NOTE:
Two (2) 750W Redundant Power Supply units and one (1) RPS enablement kit (P/N 508544-B21) are
required to achieve redundancy.
NOTE:
The 2nd hot plug hard disk drive cage requires the purchase of 750W Redundant Power Supply,
Redundant Power Supply Enablement Kit and HP Smart Array P410 Controller (if not already part of the
configuration)
System Fans
System supports a total of four (4) fans
Two (2) fans ship standard for 1P configuration - Non-hot plug, Non-redundant system fans
NOTE:
For redundancy, please order a redundant fan option kit (513927-B21) which comes with 2 fans
Three(3) fans ship standard for 2P configuration - Non-hot plug, Non-redundant system fans
NOTE:
If customer orders the standalone redundant fan option kit (513927-B21), two (2) fans in a two-fan
packaged box will be received. Only one (1) fan is required for system redundancy. The other one can be
saved as a spare part.
NOTE:
If customer orders the redundant fan kit along with the server, the extra fan will not be received.
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server Hyper V
Red Hat Enterprise Linux
(RHEL)
SUSE Linux Enterprise Server
(SLES)
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport
Graphics
32MB shared supporting all display resolutions up to 1600x1200 16bpp @75Hz
NOTE:
8MB is dedicated to video memory.
Form Factor
Tower (5U)
NOTE:
Rack mounting available via HP Tower to Rack Conversion Tray, Universal Kit. Please see the
options section in this QuickSpecs.
QuickSpecs
HP ProLiant ML150 Generation 6 (G6)
Standard Features
DA - 13249 North America — Version 33 — September 24, 2012
Page 5

Other manuals for HP ProLiant ML150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML150 and is the answer not in the manual?

HP ProLiant ML150 Specifications

General IconGeneral
Tcase72.8 °C
Bus typeQPI
SteppingR2
FSB ParityNo
Scalability2S
Processor cache15 MB
Processor cores6
Processor modelE5-2603V3
System bus rate6.4 GT/s
Processor seriesIntel Xeon E5-2600 v3
Processor socketLGA 2011-v3
Processor codenameHaswell
Motherboard chipsetIntel C610
Number of QPI links2
Processor frequency1.6 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor package size52.5 x 45 mm
Processor front side bus- MHz
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurationsx4, x8, x16
Supported instruction setsAVX 2.0
Thermal Design Power (TDP)85 W
Number of processors installed1
Physical Address Extension (PAE)46 bit
Maximum number of PCI Express lanes40
Memory types supported by processorDDR4-SDRAM
Memory channels supported by processorQuad
Memory clock speeds supported by processor1600 MHz
Memory bandwidth supported by processor (max)51 GB/s
Maximum internal memory supported by processor768 GB
HDD size- \
RAID support-
HDD interfaceSerial ATA
Total storage capacity0 GB
Maximum storage capacity- TB
Number of HDDs installed0
Memory slots16x DIMM
Internal memory4 GB
Memory clock speed2133 MHz
Maximum internal memory256 GB
Memory layout (slots x size)1 x 4 GB
Graphics card familyNVIDIA
Intel® Virtualization Technology (Intel® VT)VT-d, VT-x
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity4
Chassis typeRack (1U)
Power supply550 W
Processor ARK ID83349
Intel Secure Key Technology version1.00
Intel Identity Protection Technology version0.00
PCI Express slots version3.0
Weight and Dimensions IconWeight and Dimensions
Depth620 mm
Width200 mm
Height432.6 mm
Weight22230 g

Related product manuals