HP ProLiant DL140 Server Setup and Installation Guide 49
Table C-4: BIOS Beep Codes
Note: The descriptions of BIOS Beep Codes refer to Chapter 5.
Number of Beeps Troubleshooting Action
1, 2 or 3 Reseat the memory, or replace with known good modules.
4-7, 9-11 Fatal error indicating a serious problem with the system.
Remove add-in card to eliminate the possibility of interference.
‧ If the beep codes are generated even when all other expansion cards are
absent, the motherboard has a serious problem.
‧ If the beep codes are not generated when all other expansion cards are
absent, one of the add-in cards is causing the malfunction. Insert the cards back
into the system one at a time until the problem happens again. This will reveal
the malfunctioning add-in card.
8 If the system video adapter is an add-in card, replace or reseat the video
adapter. If the video adapter is an integrated part of the system board, the board
may be faulty.
To Next Page
Loading...
Need help?
General